碳中和背景下配电网差异化节能降耗潜力评估分

为了提高配电网差异化节能降耗效果，解决现有潜力评估方法存在的应用性能差的问题，提出碳中和背景下配电网差异化节能降耗潜力优化评估方法。根据配电网的空间结构，构建相应的等值电路模型。在该模型下，从设备损耗和运行附加损耗2个方面计算配电网的损耗量。根据损耗量计算结果，确定配电网差异化碳中和节能降耗方式。从静态和动态2个角度设置潜力评估指标，通过指标数据处理、指标权重求解等步骤，得出配电网差异化节能降耗潜力的综合量化评估结果。将设计潜力评估方法应用到配电网的差异化节能降耗改造工作中，能够有效降低配电网的实际线损量、降低区域损耗费用，并具有较高的应用价值。     

分光光度法和光度滴定法联合测定湿法炼锌流程中钴渣浸出液中锌钴镍

湿法炼锌流程中钴渣浸出液中含有高浓度的Fe²⁺和Mn²⁺,用分光光度法测定Co²⁺和Ni²⁺时,Fe²⁺-EDTA会严重干扰Co²⁺和Ni²⁺的测定;在用光度滴定法测定Zn²⁺和Co²⁺合量时,Ni²⁺对二甲酚橙指示剂具有封闭作用,Mn²⁺亦与EDTA螯合,导致滴定结果偏高。为消除Fe²⁺和Mn²⁺对Zn²⁺、Co²⁺和Ni²⁺测定的干扰,实验进行氧化分离Fe²⁺和Mn²⁺预处理,在NaAc/Hac缓冲体系下,以EDTA作显色剂用分光光度法测定Co²⁺、Ni²⁺。在波长466nm处,Co²⁺的线性范围为50~500mg/L时与吸光度呈线性,相关系数R²为0.9992;在384nm处,Ni²⁺的线性范围为50~500mg/L时与吸光度呈线性,相关系数R²为0.9998。根据分光光度法测出Ni²⁺物质的量,加入1.1倍的丁二酮肟以除去Ni²⁺,用二甲酚橙为指示剂,EDTA鳌合-光度滴定法测定Zn²⁺、Co²⁺合量,扣减Co²⁺含量得出Zn²⁺含量。选取4个锌湿法炼锌流程中钴渣浸出液实际样品,按照实验方法中的分光光度法测定Co²⁺和Ni²⁺,光度滴定法测定Zn²⁺、Co²⁺合量,Zn²⁺、Co²⁺和Ni²⁺测定结果的相对标准偏差(RSD,n=6)均不大于0.70%,加标回收率分别为99.59%~100.41%、99.69%~100.64%、99.92%~100.08%。     

磷酸脲母液制备工业级磷酸二氢铵工艺研究

湿法磷酸制备磷酸脲过程中会副产大量磷酸脲母液,母液含有金属杂质及五氧化二磷含量较高。采用溶剂萃取法回收磷酸脲母液中五氧化二磷制备工业级磷酸二氢铵（MAP）,分别考察了包括萃取、洗涤、中和、精制、结晶等工艺流程对产品收率及纯度的影响,确定了最佳工艺条件：萃取相比（有机相与水相体积比）=3:1,萃取时间为5 min,萃取温度为50 ℃,洗涤相比（有机相与洗涤剂体积比）=10:1,中和pH为4.5,复合酸性萃取剂PO8皂化率为20%,精制相比（萃取剂与水相体积比）=1:1,浓缩比为1.36,结晶温度为30 ℃。在该条件下制备的工业级MAP纯度可达99.45%,母液中五氧化二磷回收率为85.34%。该工艺对环境友好,原料中五氧化二磷回收率高,具有较高的经济效益。     

Modified Two-Phase Titration Methods to Quantify Surfactant Concentrations in Chemical-Enhanced Oil Recovery Applications

In enhanced oil recovery applications, surfactants are injected into reservoirs along with polymers and salts. The effluents eluted from lab experiments and field tests are analyzed by HPLC methods using an evaporative light scattering detector (ELSD) detector. When the surfactant concentrations are less than 100 ppm, HPLC methods are inaccurate. A novel two-phase titration method is developed where surfactant concentrations can be quantified using a calibration curve constructed with UV/vis absorption. This method can analyze surfactant concentrations 5–80 ppm where dilution eliminates any high-salinity interferences with the absorption measurements. The method is based on formation of a dye-surfactant complex and the light absorption of the complex has a linear correlation with the surfactant concentration. Anionic surfactant concentrations lower than 100 ppm can be accurately quantified using this method with methylene blue. The method was also developed for low concentrations (<50 ppm) of cationic surfactants using methyl orange and indigo carmine. The indigo carmine method can be used without the use of an organic phase. All methods are applicable at salinities up to 3 wt%. Both the methylene blue method and the methyl orange method can be used to detect zwitterionic surfactants. These methods can be used in the presence of polymers without any prior treatments.     

Detailed Insight into the Interaction of Bicyclic Somatostatin Analogue with Cu(II) Ions

Somatostatin analogues are useful pharmaceuticals in peptide receptor radionuclide therapy. In previous studies, we analyzed a new bicyclic somatostatin analogue (BCS) in connection with Cu(II) ions. Two characteristic sites were present in the peptide chain: the receptor- and the metal-binding site. We have already shown that this ligand can form very stable imidazole complexes with the metal ion. In this work, our aim was to characterize the intramolecular interaction that occurs in the peptide molecule. Therefore, we analyzed the coordination abilities of two cyclic ligands, i.e., P1 only with the metal binding site and P2 with both sites, but without the disulfide bond. Furthermore, we used magnetic circular dichroism (MCD) spectroscopy to better understand the coordination process. We applied this method to analyze spectra of P1, P2, and BCS, which we have described previously. Additionally, we analyzed the MCD spectra of P3 ligand, which has only the receptor binding site in its structure. We have unequivocally shown that the presence of the Phe-Trp-Lys-Thr motif and the disulfide bond significantly increases the metal binding efficiency.     

滴定-凝胶法制备球形水凝胶吸附材料及其在废水处理中的应用

滴定-凝胶法制备球形水凝胶吸附材料具有3D倒漏斗状微观形貌结构，孔径分布宽泛，对水体中重金属、染料等污染物具有快速响应机制，已被广泛用于水处理过程研究。综述了滴制法制备球形水凝胶吸附材料的主要过程机理、水凝胶具有的特殊形貌结构及其在水处理过程中的应用，分析了球形水凝胶吸附材料在水处理应用过程中存在的问题和局限，并指出了其在水处理领域的应用前景及发展方向。     

德兴铜矿酸碱废水水质分析方法

为了给德兴铜矿酸碱废水治理工艺提供准确的酸性废水的酸度，碱性废水的碱度，TFe和Fe^2 以及CaCO3的浓度数据，进行分析方法的研究和探讨。采用电位洋定法测定酸度碱度，辈我啉比色法测定TFe和Fe^2 ，以及用修列达法（JISK／451）测定尾矿浆碱水中的CaCO3含量。介绍分析方法的改进，分析过程步骤和分析结果。     

微电解-中和沉淀法处理酸性重金属矿山地下水的试验研究

对矿山酸性地下水中所含铅、锌、锑三种重金属离子的去除方法进行了试验研究。研究结果表明 ,采用微电解—中和沉淀法处理该地下水 ,对三种金属离子均有很高的去除效率 ,处理后的水质指标达到了矿山选矿工艺用水的要求。     

从废锂离子电池中回收钴

采用硫酸浸出 -电积工艺从废锂离子电池中回收钴。用 10mol/L硫酸 ,在 70℃浸出废锂离子 1h ,钴浸出率接近10 0 %。调节浸出溶液pH至 2 0～ 3 0 ,在 90℃鼓风搅拌 ,中和水解脱除其中杂质。在 5 5～ 60℃的条件下以 2 3 5A·m- 2 的电流密度电解 ,电流效率为 92 0 8% ,产出的电钴质量符合GB65 17-86中 1A#电钴标准。钴直收率大于 93 %。     

连续滴定法测定矿石及合金中砷锑含量

用浓硫酸溶样,在一定温度下,先用硫酸铈滴定,再用溴酸钾滴定,可分别计算出Sb和As的含量.该法操作简单、测定快速,相对标准偏差小于1.5%,适用于常规的矿石和合金中砷锑的测定.